
TRANG CHỦ Sản phẩm Koehler Thiết bị kiểm tra độ nhớt động học và động lực học Thiết bị đo độ nhớt KV1000
Test Method
Kinematic viscosity is of primary importance in the design and selection of a wide range of petroleum products. Calibrated capillary viscometers are used to measure flow under gravity or vacuum at precisely controlled temperatures.
Features and benifits
Accommodates six capillary viscometers
Variable temperature limit control
Conforms to ASTM D445 and related specifications
KV1000 Kinematic Viscosity Baths
Constant temperature bath for kinematic viscosity testing of petroleum products. Accommodates six round 2" (51mm) dia. viscometer holders. Bath temperature stabilizes within ±0.5°C (±1°F) of setting, and final adjustment to within ±0.01°C (±0.02°F) can be made. Test temperatures of up to 150°C (302°F) can be selected. Temperature limit control permits the operator to select an overtemperature cutoff point to protect against accidental overheating. Control unit includes immersion heater, circulating stirrer and temperature probe. Composition top plate rests on a 12x12" (30.5x30.5cm) or 12x18" (30.5x46cm) Pyrex™ jar. Order capillary viscometers, viscometer holders and thermometer separately.
Specifications
Conforms to the specifications of:
ASTM D445, D6074, D6158; IP 71; ISO 3104; DIN 51550;
FTM 791-305; NF T 60-100
Capacity: Six (6) glass capillary viscometers
Bath Medium: water or white technical oil
Included Accessories
Port Covers, stainless steel (6)
![]() |
Ordering Information |
|