
TRANG CHỦ Sản phẩm Metrohm Hoa Ý Thiết bị trong sản xuất 2035 Process Analyzers
2035 Process Analyzer là một thiết bị phân tích hóa học linh hoạt bao gồm 03 cấu hình cơ bản: Chuẩn độ điện thế, quang phổ và chuẩn độ nhiệt.
2035 Process Analyzer là một giải pháp đầy đủ cho phân tích online 24/7 của các chỉ tiêu quan trọng trong dây chuyền sản xuất và trong xử lý nước thải.
Tính năng nổi bật
-
Bộ phận tiếp xúc hóa chất ( wet part) thiết kế dạng modul sử dụng linh hoạt cho nhiều ứng dụng
-
Cho phép nâng cấp các kỹ thuật đo trực tiếp ( pH, độ dẫn)
-
Đáp ứng tiêu chuẩn IP66/NEMA 4 làm việc trong môi trường khắc nghiệt
-
Tối ưu hóa theo yêu cầu khách hàng, giao diện sử dụng thân thiện với tính năng bảo mật nhiều cấp
-
Khả năng điều khiển từ xa ( Remote control) cho phép xử lý kết quả và kiểm tra thiết bị một cách dễ dàng hơn
2035 Process Analyzers systems
Customization for any situation

- cooling/heating,
- pressure reduction,
- degassing,
- filtration,
- and much more.
Burets or pumps can be chosen in the analyzer for all liquid handling tasks, and selection valves are implemented for multiple sample streams.
Additionally, a wall mount, table stand, and reagent cabinet are available for the 2035 Process Analyzer for further customization. Shelters and other specialized protection solutions can be custom-built upon request.
Titration made simple

This potentiometric version is also suitable for Ion-Selective Analysis, which is an accurate standard addition technique ideal for more difficult sample matrices at low concentrations.
With hundreds of applications already available online, you can be assured of Metrohm’s expertise in the field of titration.
> Find the titration application you’re looking for …
Stable photometric analyses

Common interferences such as sample color and turbidity are eliminated by the use of differential measurements taken before and after the addition of a color reagent. The thermostated photometer module eliminates sample temperature effects, ensuring repeatable and accurate results with high sensitivity at low concentration levels.
Thermometric titration for difficult samples

The thermometric sensor requires no calibration and contains no membrane or diaphragm. The endpoint is determined by a change in temperature of the solution during the titration. Rapid analysis is possible with this technique – acid mixtures, for example, can be analyzed in less than three minutes.
New: ASTM D8045, released in 2016, describes a thermometric catalytic titration method to measure the Acid Number in crude oil and petroleum products. Using Metrohm thermometric titration, you can speed up your analyses and reduce the amount of solvent required.
2035 Process Analyzers systems
Downloads